Click below to view our selection of gas detection products
Wall-mount Gas Detector/Monitor
Single and Multichannel Gas Monitor / Alarm in Nema 4 Enclosure
Two Stage Alarms in Single and Multichannel Unit - Controller
Sensor Data Transmitter (SDT) Gas Detector
SINGLE AND MULTI-CHANNEL GAS MONITOR/ALARM IN NEMA-4 ENCLOSUREThe gas monitor includes remote sensor(s) and controller in NEMA-4 enclosure for indoor, or outdoor installation. Each sensor with explosion-proof junction box housing and 50 feet cable wire connects to the controller. Each channel operates independently, indicates the concerned gas level at different sites, and can be seen instantly. Standard individual channel has Power GREEN LED, Alarm RED LED, Fail (Malfunction) YELLOW LED, and display (PPM or %LEL). Basic gas equipment detection unit has individual module, master module, and power module. This design gives easy operation and replacement, if necessary for all your gas detection solution needs. |
 |
SINGLE AND MULTI-CHANNEL GAS MONITOR/ALARM IN NEMA-4 ENCLOSUREThe gas monitor includes remote sensor(s) and controller in NEMA-4 enclosure for indoor, or outdoor installation. Each sensor with explosion-proof junction box housing and 50 feet cable wire connects to the controller. Each channel operates independently, indicates the concerned gas level at different sites, and can be seen instantly. Standard individual channel has Power GREEN LED, Alarm RED LED, Fail (Malfunction) YELLOW LED, and display (PPM or %LEL). Basic gas equipment detection unit has individual module, master module, and power module. This design gives easy operation and replacement, if necessary for all your gas detection solution needs. |
|
|
| Operating Temp: | -10F to +150F (-20C to +65C) |
| Repeatability: | ∓ 2% |
| Meter Range: | PPM, or % LEL |
| Alarm Circuit: | Fail, Alarm |
| Audio Alarm Outputs: | 95 dB (steady tone) |
| Meter Range: | PPM, or % LEL |
| Panel Controls: | Zero, Span, Alarm set point, alarm set check switch, test switch, reset switch (non-latch mode) | Power Input: | 115 VAC/220VAC 50/60Hz, or 24 VDC |
| Power Consumption: | Approx 3.5 Watts per channel |
| Dimensions: | 9"W X 12"H X 5"D (1 Channel) 12"W X 16"H X 8"D (2 Channel) 16"W X 16"H X 8"D (4 Channel) 20"W X 16"H X 8"D (8 Channel) 24"W X 20"H X 8"D (10 Channel) |
| Weight: | 12 lbs. - 1 Channel 24 lbs. - 2 Channel 30 lbs. - 4 Channel 40 lbs. - 8 Channel 50 lbs. - 10 Channel |
| Panel Box: | NEMA type 4 panel enclosure, UL listed |
| Cable Length: | #22 or #20 AWG Shield, 3 conductor cable, up to 600 feet or longer |
| Warranty: | 1 year |
| Recorder Output: (Optional) | 4-20mA (500 Ohm Load max.), or 0-1 VDC |
| Relay Contacts: (Individual Channel) | Fail Relay, Alarm Relay (NO, COM, NC 1A 1 -115VAC, or 1A- 24DC) |
| Common Relay: (2 channel or more system only) | (NO, COM, NC 7A -115VAC, 220 VAC, or 7A - 24 VDC) |
*System includes NEMA 4 enclosure and remote sensor with 50 feet cable.